|
Air Filter - 42mm / Flat Pancake
|
|
Air Filter - 42mm / Shielded Can - Chrome
|
|
Air Filter - 42mm / Shielded Cone - Gold
|
|
|
|
|
|
|
|
Flat pancake filter is great for fitting in tight spaces. Improves air flow and helps keep your carburetor free from dirt and other foreign matter.
Specifications:
Mounting Diameter: 42mm
Outer Diameter: 75mm
Overall Length: 35mm
|
Shielded can-shaped air filter Improves air flow and helps keep your carburetor free from dirt and other foreign matter. Also has a shield which will help keep light rain, mud and water from splashing onto the filter element.
Specifications:
Mounting Diameter: 42mm
Outer Diameter: 100mm (shied cover)
Overall Length: 80mm
Color: Chrome
|
Shielded Cone-shaped air filter Improves air flow and helps keep your carburetor free from dirt and other foreign matter.
Specifications:
Mounting Diameter: 42mm
Outer Diameter: 87mm
Overall Length: 85mm
Color: Gold
|
|
|
|
Air Filter - 44mm, 30° Angle (Blue)
|
|
Air Filter - Cone HP, 30 Degree Angled Flange / 44mm
|
|
Air Filter - Cone - 44mm
|
|
|
|
|
|
|
|
Shielded air filter with 44mm rubber mounting and 30 degree angle.
Specifications:
Angle: 30°
Mounting Diameter: 44mm or 1.70 inches
Outer Diameter: 90mm or 3.75 inches
Overall Length: 125mm or 5 inches
Color: Blue
|
High performance air filter element allows for greater airflow and improved performance. Mounting flange is angled at 30 degrees to allow for an easy fit in tight spaces.
Click on photo for more info.
|
High Performance air filter element allows for greater airflow and improved performance.
Click on photo for more info.
|
|
|
|
Air Filter - Saucer / 44mm
|
|
Air Filter - Straight / 44mm
|
|
Air Filter - Uni 44mm
|
|
|
|
|
|
|
|
High Performance air filter element allows for greater airflow and improved performance.
Click on photo for more info.
|
High performance air filter element allows for greater airflow and improved performance.
Click on photo for more info.
|
Uni Filter can be washed for extended life, great for extreme dusty environments.
Specifications:
Mounting Diameter: 44mm or 1.70 inches
Outer Diameter: 73mm or 2.85 inches
Overall Length: 80mm or 3.25 inches
|
|
|
|
Air Filter - Uni 44mm / 15° Angled Dual Layer Pod Air Filter
|
|
Air Filter Adapter / Velocity Stack with Built in Choke, 44mm / 33cc, 36cc, 43cc and 49cc
|
|
Air Filter Adapter/ Velocity Stack, 44mm / 33cc, 36cc, 43cc and 49cc
|
|
|
|
|
|
|
|
Uni dual layer pod filter with 15 degree angle. Filter can be washed for extended life, great for extreme dusty environments.
Specifications:
Angle: 15°
Mounting Diameter: 44mm or 1.70 inches
Outer Diameter: 90mm or 3.75 inches
Overall Length: 125mm or 5 inches
|
Billet aluminum air filter adapter with built in choke. Used to upgrade your stock air filter to a High Performance Air Filter.
Click on photo for more info.
|
Billet aluminum air filter adapter used to upgrade your stock air filter to a High Performance Air Filter.
Click on photo for more info.
|
|
|
|
Air Filter and Stack - Saucer
|
|
Air Filter and Stack - Straight
|
|
Air Filter Assembly - 22/26cc 2-cycle
|
|
|
|
|
|
|
|
High performance air filter and air filter adapter allows for greater airflow and improved performance.
Click on photo for more info.
|
High performance air filter and air filter adapter allows for greater airflow and improved performance.
Click on photo for more info.
|
Stock air filter and choke assembly for 22cc & 26cc 2-cycle engines.
Specification:
Bolt Hole Spacing: 31mm (center to center)
Length: 86mm (overall)
Width: 86mm (overall)
|
|
|
|
Carburetor - 9mm for 22/26cc, 2-cycle
|
|
Carburetor - High Performance 43/49cc - 15.5mm
|
|
Choke Plate Insert - 33cc, 36cc, 43cc and 49cc
|
|
|
|
|
|
|
|
Stock carburetor for the 22cc & 26cc 2-stroke engines.
Specifications:
Intake Hole: 9mm
Bolt hole spacing: 31mm (center to center)
|
HP Carburetor for the 43-49cc 2-stroke Bikes.
|
Choke plate allows easier cold starts. Can be used where no choke is present for the 33cc, 36cc, 43cc and 49ccs engines, X1, X2, X7, Z600, C1 and many other 49cc 2-stroke
engine applications.
Click on photo for more info.
|
|
|
|
Clutch - 22/26cc, 2-cycle
|
|
Clutch bell housing (54mm Version) - 22/26cc, 2-cycle
|
|
Clutch bell housing (56mm Version) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Stock clutch assembly for 22cc & 26cc 2-cycle engines.
Specification:
Diameter: 52mm
Width: 16mm
Bolt Hole Spacing: 34mm (center to center)
|
Clutch drum 54mm version for 22cc & 26cc 2-cycle engines.
Specification:
Inner Diameter: 54mm
Outer Diameter: 57.5mm
Width: 22mm
Bolt Hole: 11mm
|
Clutch drum 56mm version for 22cc & 26cc 2-cycle engines.
Specification:
Inner Diameter: 56mm
Outer Diameter: 60mm
Width: 25mm
Bolt Hole: 9mm
|
|
|
|
Clutch Bolts & Washers Set - 22/26cc, 2-cycle
|
|
Clutch Spring - 22/26cc, 2-cycle
|
|
Crankshaft (Version 1) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Bolts and Wavy washers for clutch 22cc & 26cc 2-cycle engine.
Specifications:
See Image
Sold as set of two.
|
Stock clutch spring for 22cc & 26cc 2-cycle engines.
Specification:
Spring Diameter: 10.5mm
Spring Coil Length: 11mm
Overall Length: 31.5mm
|
Version 1, male threads on both end. Stock crankshaft assembly for 22cc & 26cc 2-cycle engines.
|
|
|
|
Crankshaft (Version 2) - 22/26cc, 2-cycle
|
|
Cylinder - 26cc/34mm (Version 1)
|
|
Cylinder - 26cc/34mm (Version 2)
|
|
|
|
|
|
|
|
|
Version 2, male thread on one end and female thread on other end. Stock crankshaft assembly for 22cc & 26cc 2-cycle engines.
|
Version 1. Cylinder for 26cc 2-cycle engine.
Specifications:
Bore: 34mm
Mounting Bolt Spacing: 54mm
|
Version 2. Cylinder for 26cc 2-cycle engine.
Specifications:
Bore: 34mm
Mounting Bolt Spacing: 42mm & 34mm
|
|
|
|
Engine - 22.5cc, 2-cycle
|
|
Engine Cover (Version 1) - 22/26cc, 2-cycle
|
|
Engine Cover (Version 2) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Engine comes 100% assembled and ready to start.
Specifications:
Mounting Bolt Hole Spacing: 38mm or 2.25 inches
Piston: 22.5cc
Oil Mix: 40:1 Ratio (Requires 2-cycle oil mixed into the gas.)
Kill Switch: Two wires 1 Black/Red
|
Engine cover for flywheel and clutch side 22cc & 26cc 2-cycle engine.
|
Engine cover for flywheel and clutch side 22cc & 26cc 2-cycle engine.
|
|
|
|
Engine Crankcase (Version 1) - 22/26cc, 2-cycle
|
|
Engine Crankcase (Version 2) - 22/26cc, 2-cycle
|
|
Exhaust (Left Outlet Version) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
|
Version 1. Engine crankcase for 22cc & 26cc 2-cycle engine.
|
Version 2. Engine crankcase for 22cc & 26cc 2-cycle engine.
|
Exhaust for 22cc & 26cc 2-cycle engine with exhaust outlet on Left side.
Specifications:
Mounting Bolt Hole Spacing: 36mm
Exhaust Hole: 20x12mm
|
|
|
|
Exhaust (Right Outlet Version) - 22/26cc, 2-cycle
|
|
Flywheel (Version 1) - 22/26cc, 2-cycle
|
|
Flywheel (Version 2) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Exhaust for 22cc & 26cc 2-cycle engine with exhaust outlet on Right side.
Specifications:
Mounting Bolt Hole Spacing: 36mm
Exhaust Hole: 20x12mm
|
Version 1. Flywheel for 22cc & 26cc 2-cycle engine.
|
Version 2. Flywheel for 22cc & 26cc 2-cycle engine.
|
|
|
|
Gas Tank (Version 1) - 22/26cc, 2-cycle
|
|
Gas Tank (Version 2) - 22/26cc, 2-cycle
|
|
Gasket - Air Filter Adapter / 33cc, 36cc, 43cc and 49cc
|
|
|
|
|
|
|
|
|
Version 1. Gas tank for 22cc & 26cc 2-cycle engine.
|
Version 2. Gas tank for 22cc & 26cc 2-cycle engine.
|
Velocity stack gasket for the 33cc, 36cc, 43cc and 49ccs engines.
|
|
|
|
Gasket - WT Walbor Style Carburetors
|
|
Gasket for Carburetor - 22/26cc, 2-cycle
|
|
Gasket for Crankcase - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
For use with WT walbro style carburetors.
Specifications:
Center Hole Diameter: 16mm
Bolt Hole Spacing: 31.5mm
|
Carburetor gasket for 22cc & 26cc 2-cycle engine.
Specification:
Bolt Hole Spacing: 31mm (center to center)
Intake Hole Diameter: 10.5mm
|
Crankcase gasket for 22cc & 26cc 2-cycle engine.
Specifications:
Bolt Hole Spacing: 36.5mm (center to center)
Bolt Hole Spacing: 50mm (center to center)
|
|
|
|
Gasket for Exhaust - 22/26cc, 2-cycle
|
|
Gasket for Head - 22/26cc, 2-cycle
|
|
Gasket for Intake Manifold - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Exhaust gasket for 22cc & 26cc 2-cycle engine.
Specifications:
Mounting Bolts Spacing: 32mm (center to center)
Exhaust Hole: 20x12mm
|
Head gasket for 22cc & 26cc 2-cycle engine
Specifications:
Center Diameter: 38mm
Bolt Hole Spacing: 34.5mm (center to center)
Bolt Hole Spacing: 42.5mm (center to center)
|
Intake manifold gasket for 22cc & 26cc 2-cycle engine.
Specifications:
Intake Hole: 19x11mm
|
|
|
|
Gasket Set (complete set) - 22/26cc, 2-cycle
|
|
Ignition Coil (One Prong) - 22/26cc, 2-cycle
|
|
Intake Manifold (15mm intake, for HP carburetor only) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Complete gasket set for 22cc & 26cc 2-cycle engine.
Includes:
Carburetor Gasket
Intake Manifold Gasket
Crankcase Gasket
Head Gasket
Exhaust Gasket
|
Ignition coil for 22cc & 26cc 2-cycle engine.
Specifications:
Bolt Hole Spacing: 35mm or 1.30 inches (center to center)
Wires: 2 wires, 1 black and 1 Red
|
High performance intake manifold for 22cc & 26cc. For use with the 2-cycle high performance carburetor only.
Specifications:
Bolt Hole Spacing: 34mm (engine mount)
Bolt Hole Spacing: 31mm (carburetor mount)
Intake Diameter: 15mm
Works with part # X7CR301650 / Carburetor - High Performance 43/49cc - 15.5mm
|
|
|
|
Intake Manifold (Version 1) - 22/26cc, 2-cycle
|
|
Intake Manifold (Version 2) - 22/26cc, 2-cycle
|
|
Piston - 22cc/32mm
|
|
|
|
|
|
|
|
Version 1. Intake manifold for the stock carburetor 22cc & 26cc 2-cycle engine.
Specifications:
Intake Diameter: 11.5mm
Carburetor Mounting Bolt Holes: 31mm (center to center)
Manifold Mounting Bolt Holes: 33.5 (center to center)
|
Version 2. Intake manifold for the stock carburetor 22cc & 26cc 2-cycle engine.
Specifications:
Intake Diameter: 11.5mm
Carburetor Mounting Bolt Holes: 31mm (center to center)
Manifold Mounting Bolt Holes: 33.5 (center to center)
|
Piston for 22cc 2-cycle engine.
Specifications:
Diameter: 32mm
Overall Height: 32mm
Wrist Pin Diameter: 8mm
Ring Slot: 1.50mm
|
|
|
|
Piston - 26cc/34mm
|
|
Piston Rebuild Kit - 22cc/32mm
|
|
Piston Rebuild Kit - 26cc/34mm
|
|
|
|
|
|
|
|
Piston for 26cc 2-cycle engine.
Specifications:
Diameter: 34mm
Overall Height: 31mm
Wrist Pin Diameter: 8mm
Ring Slot: 1.20mm
|
Piston rebuild kit for 22cc 2-cycle engine.
Specifications:
Diameter: 32mm
Overall Height: 32mm
Wrist Pin Diameter: 8mm
Ring Slot: 1.50mm
|
Piston rebuild kit for 26cc 2-cycle engine.
Specifications:
Diameter: 34mm
Overall Height: 31mm
Wrist Pin Diameter: 8mm
Ring Slot: 1.20mm
|
|
|
|
Piston Ring Pair - 32mm / 22cc, 2-cycle
|
|
Piston Ring Pair - 34mm / 26cc, 2-cycle
|
|
Piston Wrist Pin - 8mm x 25.3mm for 32mm pistons, 22cc 2-cycle
|
|
|
|
|
|
|
|
Piston ring set for 22cc 2-cycle engine.
Specifications:
Diameter: 32mm
Thickness: 1.50mm
|
Piston ring set for 26cc 2-cycle engine.
Specifications:
Diameter: 34mm
Thickness: 1.20mm
|
Piston wrist pin for 22cc 2-cycle engine.
Specifications:
Wrist Pin: 8mm x 25.3mm
|
|
|
|
Piston Wrist Pin - 8mm x 27.5mm for 34mm pistons, 26cc 2-cycle
|
|
Piston Wrist Pin Bearing - 8mm for 32mm & 34mm - 22/26cc 2-cycle
|
|
Piston Wrist Pin Clip - 8mm for 32mm & 34mm - 22/26cc 2-cycle
|
|
|
|
|
|
|
|
Piston wrist pin for 26cc 2-cycle engine.
Specifications:
Wrist Pin: 8mm x 27.5mm
|
Bearing for wrist pin 22cc & 26cc 2-cycle engine.
Specifications:
Inner Diameter: 8.3mm
Outer Diameter: 10.8mm
Width: 11.14mm
|
Clips for wrist pin 22cc & 26cc 2-cycle engine.
Specifications:
Diameter: 8mm (closed)
Sold as set of two.
|
|
|
|
Pull Start (Version 1) - 22/26cc, 2-cycle
|
|
Pull Start (Version 2) - 22/26cc, 2-cycle
|
|
Starter Catch (Version 1) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
Version 1. Pull start for 22cc & 26cc 2-cycle engine
Specifications:
Bolt Hole Spacing: 49.5mm/ 1.95 inches (center to center)
Width: 67.75mm
Thickness: 28.5mm
Note: This pull start is half the size of the 43-49cc pull start please verify the dimensions when ordering.
|
Version 2. Pull start for 22cc & 26cc 2-cycle engine
Specifications:
Bolt Hole Spacing: 49.5mm (center to center)
Length: 86.5mm
Width: 69mm
Thickness: 28mm
|
Version 1. Pull start catch for 22cc 2-cycle engine.
|
|
|
|
Starter Catch (Version 2) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
|
Version 2. Pull start catch for 26cc 2-cycle engine.
|
|
|
Become a Fan
Follow Us
Watch Our Channel