|
Air Filter - Cone HP, 30 Degree Angled Flange / 44mm
|
|
Air Filter - Cone - 44mm
|
|
Air Filter - Stock, Cag
|
|
|
|
|
|
|
|
High performance air filter element allows for greater airflow and improved performance. Mounting flange is angled at 30 degrees to allow for an easy fit in tight spaces.
Click on photo for more info.
|
High Performance air filter element allows for greater airflow and improved performance.
Click on photo for more info.
|
Stock air filter for 47cc and 49cc 2-stroke engine for the mini pocket bikes.
Click on photo for more info.
|
|
|
|
Air Filter Adapter/ Velocity Stack - Cag
|
|
Air Filter and Stack - 30 degree Angled Filter
|
|
Air Filter and Stack - Saucer
|
|
|
|
|
|
|
|
Billet aluminum air filter adapter used to upgrade your stock air filter to a High Performance Air Filter.
Click on photo for more info.
|
High performance air filter and air filter adapter allows for greater airflow and improved performance.
Click on photo for more info.
|
High performance air filter and air filter adapter allows for greater airflow and improved performance.
Click on photo for more info.
|
|
|
|
Air Filter and Stack - Straight
|
|
Boost Port Piston Kit - 49cc / 44mm - 10mm Wrist Pin
|
|
Boost Port Piston Kit - 49cc/44mm - 12mm Wrist Pin
|
|
|
|
|
|
|
|
High performance air filter and air filter adapter allows for greater airflow and improved performance.
Click on photo for more info.
|
Replace your original piston with this ported piston and see increased power when used with a ported cylinder.
Kit includes ported piston, piston rings, wrist pin, wrist pin bearings and C-clips.
Click on photo for more info.
|
Replace your original piston with this ported piston and see increased power when used with a ported cylinder.
Click on photo for more info.
|
|
|
|
Cable Bracket for Walbro Carb
|
|
Carburetor - High Performance 43/49cc - 15.5mm
|
|
Carburetor - Stock, Cag
|
|
|
|
|
|
|
|
Cable Bracket for the Walbro Style Carb.
Click on image for details.
|
HP Carburetor for the 43-49cc 2-stroke Bikes.
|
Stock carburetor for the 47cc and 49cc 2-stroke engines without an electric start.
|
|
|
|
Carburetor Kit 1 - HP with Saucer Air Filter
|
|
Carburetor Kit 1 - HP with Straight Air Filter
|
|
Chain - 25H - Cag
|
|
|
|
|
|
|
|
Carb Kit includes a fully adjustable high performance Walbro style carburetor with air and fuel mixture adjustments, a high performance air filter and velocity stack.
Click on photo for more info.
|
Kit includes a fully adjustable high performance Walbro style carburetor with air and fuel mixture adjustments, a high performance air filter and velocity stack.
Click on photo for more info.
|
Compatible with all mini pocket bikes, mini quads and other models with thin 25H chain.
Click on photo for more info.
|
|
|
|
Chain - Master Link #25H
|
|
Clutch - C-Clip Front - Cag
|
|
Clutch - Heavy Duty, Cag
|
|
|
|
|
|
|
|
Master link for all mini pocket bikes and other models with thin #25H Chain size.
Click on photo for more info.
|
This c-clip is used to hold the bearing in place for your stock and performance bell housing. Also used to hold the front sprocket onto the gearbox for super pocket bikes and other applications.
|
Fits all 47cc and 49cc engines, with three shoe clutch pads.
|
|
|
|
Clutch - Racing Clutch, Cag (Blue 1000 RPM)
|
|
Clutch - Racing Clutch, Cag (Red 2000 RPM)
|
|
Clutch - Springs (used on three shoe clutch)
|
|
|
|
|
|
|
|
Blue Springs - 1000 RPM
Click on image for more details
|
Red Springs - 2000 RPM
Click on image for more details
|
Clutch springs for 47/49cc engines with that use a three shoe clutch.
|
|
|
|
Clutch - Stock, Cag
|
|
Clutch Bell Housing - #05T / #T8F chain
|
|
Clutch Bell Housing - Cag - 25H chain
|
|
|
|
|
|
|
|
|
Fits all 47cc and 49cc engines, with three shoe clutch pads.
|
Clutch Bell Housing - Compatible with 05T chain.
Click on image for details.
|
Fits all 47cc and 49cc engines, with three shoe clutch pads.
Click on image for more details.
|
|
|
|
Clutch Bell Housing - Cag, Vented - 25H chain
|
|
Clutch Bell Housing - Cag, w/3rd Bearing (OUTER COVER)
|
|
Clutch Bell Housing - Cag, w/3rd Bearing - 25H chain
|
|
|
|
|
|
|
|
Vented clutch bell housing keeps your clutch cooler for racing and a longer life.
Click on image for details.
|
Outer cover for bell housing w/ 3rd bearing support.
Click on image for details.
|
Clutch Bell that provides improved strength for the front pinion sprocket.
Click on image for details.
|
|
|
|
Crankshaft - High Performance Full Circle Crank
|
|
Crankshaft and Connecting Rod, 47cc
|
|
Cylinder - Stock, Cag
|
|
|
|
|
|
|
|
|
High Performance Cylinder Kits with Full Circle Crank and Circle Cut Head.
|
Crank shaft and connecting rod for 47cc or 49cc pocket bikes, pocket quads and other models with the same style engines without electric start.
|
Cylinder for 47cc or 49cc pocket bikes, pocket quads and other models with the same style engines.
|
|
|
|
Engine - 47cc 2 Stroke, Cag
|
|
Engine - 49cc 2 Stroke High Performance Engine, Cag
|
|
Engine - 49cc 2 Stroke, Cag
|
|
|
|
|
|
|
|
|
Fits all mini pocket bikes, pocket quads, and other models. This engine can also be used for other applications and has no electric start.
|
Upgrade your 47/49cc engine to a high output engine with a ported and polished cylinder 44mm/49cc head and piston with boost port and full circle crank.
Fits all mini pocket bikes, pocket quads and other mini bikes. This engine can also be used for other applications.
Engine Size: :
49cc / 44mm pistons cylinder
Engine comes as shown in picture. All you need to do is mount and add gas.
|
Fits all mini pocket bikes, pocket quads, and other models. This engine can also be used for other applications and has no electric start.
|
|
|
|
Engine Bearings and Seals, CAG
|
|
Engine Bearings, CAG
|
|
Engine Case, Cag
|
|
|
|
|
|
|
|
Engine Bearings and Seals for the mini pocket bikes 43-49cc 2-stroke engines without electric start.
Click on photo for more info.
|
Specifications:
Bearing Number: 6202/P63
Outer Diameter: 35mm
Inner Diameter: 15mm
Thickness: 11mm
Click on photo for more info.
|
Engine case for 47cc or 49cc pocket bikes, pocket quads and other models with the same style engines.
|
|
|
|
Engine Crankcase Seals, CAG
|
|
Flywheel - Cag
|
|
Flywheel Puller for small engines
|
|
|
|
|
|
|
|
Specifications:
Outer Diameter: 25mm
Inner Diameter: 15mm
Thickness: 7mm
Click on photo for more info.
|
Stock flywheel for 47cc or 49cc pocket bikes, pocket quads and other models with the same style engines without an electric start.
|
Specifications:
Over Diameter: 105mm
Thickness: 11mm
Bolts (3): 50mm x 8mm
Center Bolt ((1): 72mm x 11mm
Can be adjusted from 35mm - 95mm
|
|
|
|
Flywheel, Lightweight - Cag
|
|
Fuel Cut-Off Valve
|
|
Fuel Line Filter
|
|
|
|
|
|
|
|
|
High Performance Lightened flywheel for the 47cc-49cc case reed engine.
|
Fits all bikes with a 3/16 to 1/4 fuel line hole.
|
Fuel line filter to provide cleaner fuel to the engine which prolongs engine and carburetor life.
|
|
|
|
Fuel Line Kit HP
|
|
Gasket - Carburetor, Cag
|
|
Gasket - Complete Set, Cag
|
|
|
|
|
|
|
|
|
Fuel line kit for use with the High Performance carburetor upgrade kit and stock carburetors with a primer pump that have one in and one out fuel hose.
|
Carburetor gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
Complete Engine Gasket Kit for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
|
|
|
Gasket - Copper Head Gasket, Cag
|
|
Gasket - Crank Case, Cag
|
|
Gasket - Exhaust, Cag
|
|
|
|
|
|
|
|
|
High performance copper head gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
Crank Case gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
Exhaust gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
|
|
|
Gasket - Head, Cag
|
|
Gasket - Intake Manifold, Cag
|
|
Gasket - Reed Block, Cag
|
|
|
|
|
|
|
|
|
Head gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
Intake Manifold gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
|
Reed Block gasket for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines without an electric start.
|
|
|
|
Gasket - WT Walbor Style Carburetors
|
|
Head Kit - Billet Aluminum w/Dome and Full Circle Crank
|
|
Ignition Coil - 47-49cc Cag
|
|
|
|
|
|
|
|
For use with WT walbro style carburetors.
Specifications:
Center Hole Diameter: 16mm
Bolt Hole Spacing: 31.5mm
|
Looking for more Top Speed and Power Band? Check out the High Performance Head Kits.
Click on picture for more details.
|
Coil for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
Click on product for more details and specs.
|
|
|
|
Intake Manifold, HP - Cag
|
|
Intake Manifold, Stock - Cag
|
|
Kill Switch - (version 1)
|
|
|
|
|
|
|
|
|
Fits the Mini Pocket 2-stroke engine 47cc/49cc with no electric start.
|
Stock Intake manifold for 47cc - 49cc mini pocket bikes, pocket quads, and other models with the same style engines.
|
Kill switch for mini pocket bikes and pocket quads.
|
|
|
|
Loctite - High strength, Red (6ML Tube)
|
|
Loctite - Med strength, Blue (6ML Tube)
|
|
Mixing Bottle (40 oz)
|
|
|
|
|
|
|
|
Tread lock / Lock Tight (Med strength) 50g bottle.
Helps to prevent nuts and bolts from loosening due to vibration.
|
Tread lock / Lock Tight (Med strength) 50g bottle.
Helps to prevent nuts and bolts from loosening due to vibration.
|
Mixing Bottle for the 2-stroke pocket bikes, scooters, atvs, R/C car engine and other applications.
Specifications:
Capacity: 40oz
Mixing Ratio Options: 25:1, 30:1 & 50:1
|
|
|
|
Mixing Bottle (600ml)
|
|
Pinion Wrench Tool
|
|
Piston & Rings Set - 43-47cc/40mm
|
|
|
|
|
|
|
|
|
Mixing Bottle for the 2-stroke pocket bikes, scooters, atvs, and other applications.
|
This wrench is specially designed to help you get a grip on the tiny pinions of the Cag clutch bell housing (part# CGBH301484).
|
Piston and Rings set for the 43cc-47cc/40mm that fit the 2-stroke engines.
Click on photo for more info.
|
|
|
|
Piston & Rings Set - 49cc/44mm - 10mm Wrist Pin
|
|
Piston & Rings Set - 49cc/44mm - 12mm Wrist Pin
|
|
Piston - 43-47cc/40mm
|
|
|
|
|
|
|
|
Piston and Rings set for the 49cc/44mm that fit the 2-stroke engines.
Click on photo for more info.
|
Piston and Rings set for the 49cc/44mm that fit the 2-stroke engines.
Click on photo for more info.
|
Piston for the 43-47cc/ 40mm diameter used in the 2-stroke engines.
Click on photo for more info.
|
|
|
|
Piston - 49cc/44mm - 10mm Wrist Pin
|
|
Piston - 49cc/44mm - 12mm Wrist Pin
|
|
Piston Rebuild Kit - 43-47cc/40mm - 10mm Wrist Pin
|
|
|
|
|
|
|
|
Piston for the 49cc / 44mm diameter used in the 2-stroke engines.
Click on photo for more info.
|
Piston for the 49cc / 44mm diameter used in the 2-stroke engines.
Click on photo for more info.
|
Piston rebuild kit 40mm diameter 43-47cc engines.
Click on photo for more info.
|
|
|
|
Piston Rebuild Kit - 49cc/44mm - 10mm Wrist Pin
|
|
Piston Rebuild Kit - 49cc/44mm - 12mm Wrist Pin
|
|
Piston Ring Pair - 43-47cc/40mm
|
|
|
|
|
|
|
|
Piston rebuild kit 44mm for the 49cc engines.
Click on image for more info.
|
Piston rebuild kit 44mm for the 49cc engines.
Click on image for more info.
|
Piston Rings for the 47cc / 40mm diameter piston used in the 43-47cc 2-stroke engines.
Click on photo for more info.
|
|
|
|
Piston Ring Pair - 49cc / 44mm
|
|
Piston w/boost port - 49cc/44mm - 10mm Wrist Pin
|
|
Piston w/boost port - 49cc/44mm - 12mm Wrist Pin
|
|
|
|
|
|
|
|
Piston Rings for the 49cc / 44mm diameter piston used in the 49cc 2-stroke engines.
Click on photo for more info.
|
49cc / 44mm diameter ported piston is used in the 49cc 2-stroke engines.
Click on photo for more info.
|
49cc / 44mm diameter ported piston is used in the 49cc 2-stroke engines.
Click on photo for more info.
|
|
|
|
Piston Wrist Pin - 10mm x 33mm for 40mm pistons
|
|
Piston Wrist Pin - 10mm x 36mm for 44mm pistons
|
|
Piston Wrist Pin - 12 x 37mm for 44mm pistons
|
|
|
|
|
|
|
|
Wrist pin for 2-stroke engines 43-47cc / 40mm pistons.
Specifications:
Wrist Pin: 10mm x 33mm
Click on photo for more info.
|
Wrist pin for 2-stroke engines 49cc / 44mm pistons.
Specifications:
Wrist Pin: 10mm x 36mm
Click on photo for more info.
|
Wrist pin for 2-stroke engines 49cc / 44mm pistons that use the 12mm wrist pin.
Specifications:
Wrist Pin: 12mm x 37mm
Click on image for more info.
|
|
|
|
Piston Wrist Pin Bearing - 10mm for 40mm/43-47cc pistons
|
|
Piston Wrist Pin Bearing - 10mm for 44mm/49cc pistons
|
|
Piston Wrist Pin Bearing - 12mm for 44mm/49cc pistons
|
|
|
|
|
|
|
|
Wrist pin bearing for the 43-47cc 2-stroke engines with a 40mm piston diameter and a 10mm wrist pin.
Click on image for more info.
|
Wrist pin for the 49cc pistons with a 44mm diameter and a 10mm wrist pin hole.
Click on photo for more info.
|
Wrist pin for the 49cc pistons with a 44mm diameter and a 12mm wrist pin hole.
Click on photo for more info.
|
|
|
|
Piston Wrist Pin Clip - 10mm (Pair)
|
|
Piston Wrist Pin Clip - 12mm (Pair)
|
|
Pull Start & Catch - F (47-49cc, New Version)
|
|
|
|
|
|
|
|
Wrist Pin Clip Pair for the 43cc-49cc Mini-Pocket bikes.
Click on photo for more info.
|
Wrist Pin Clip Pair for the 43cc-49cc Mini-Pocket bikes.
Click on photo for more info.
|
**NEW VERSION** Pull start for 47cc and 49cc mini pocket bikes, pocket quads and other bikes with the same style engines.
Click on photo for more information.
|
|
|
|
Pull Start - Cag, Aluminum
|
|
Pull Start - E (47-49cc)
|
|
Reed - Carbon Racing Reed
|
|
|
|
|
|
|
|
Aluminum Upgrade Pull Start for 47cc and 49cc mini pocket bikes, pocket quads and other bikes with the same style engines.
Click on photo for more information.
|
Pull start for 47cc and 49cc mini pocket bikes, pocket quads and other bikes with the same style engines.
Click on photo for more information.
|
Carbon HP Racing Reed Improves throttle response, Stronger mid-range, adds top end Power, and Increases power band and speed.
|
|
|
|
Reed Block - Cag
|
|
Spark Plug - NGK BM6A (5921)
|
|
Sprocket - 67 Tooth Rear - Cag (High Performance)
|
|
|
|
|
|
|
|
|
Reed block and reeds for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines without electric start.
|
This NGK spark plug is typically used on 33cc, 43cc, 47cc and 49cc 2-stroke engines found on pocket bikes and stand up style scooters.
Specifications:
NGK BM6A
Manufactures Part# 5921
|
High performance rear sprocket (67 Tooth) for pocket bikes that use the size 25h chain and other applications.
Made from 7075-T6 Aircraft Quality Alloy for Superior Durability.
|
|
|
|
Sprocket, 60 Tooth Rear - Cag
|
|
Sprocket, 62 Tooth Rear - Cag
|
|
Sprocket, 66 Tooth Rear - Cag
|
|
|
|
|
|
|
|
|
Rear 60 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
Rear 62 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
Rear 66 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
|
|
|
Sprocket, 68 Tooth Rear - Cag
|
|
Sprocket, 70 Tooth Rear - Cag
|
|
Sprocket, 72 Tooth Rear - Cag
|
|
|
|
|
|
|
|
|
Rear 68 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
Rear 70 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
Rear 72 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
|
|
|
Sprocket, 74 Tooth Rear - Cag
|
|
Sprocket, 75 Tooth Rear - Cag
|
|
Sprocket, 78 Tooth Rear - Cag
|
|
|
|
|
|
|
|
|
Rear 74 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
Rear 75 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
Rear 78 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other applications that use the 25h chain.
|
|
|
|
Sprocket, Ver A - #05T / #T8F Pinion, 6 Tooth Front - 10mm Thread Size
|
|
Sprocket, Ver A - #05T / #T8F Pinion, 6 Tooth Front - 8mm Thread Size
|
|
Sprocket, Ver A - #25H Pinion, 6 Tooth Front - 10mm Thread Size
|
|
|
|
|
|
|
|
Stock front sprocket for the larger 05T chain (6 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: 05T
Teeth: 6 Tooth
10mm thread size
|
Stock front sprocket for the 05T chain (6 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: 05T
Teeth: 6 Tooth
8mm thread size.
|
Stock front sprocket (6 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 6 Tooth
10mm thread size.
|
|
|
|
Sprocket, Ver A - #25H Pinion, 6 Tooth Front - 8mm Thread Size
|
|
Sprocket, Ver A - #25H Pinion, 7 Tooth Front - 10mm Thread Size
|
|
Sprocket, Ver A - #25H Pinion, 7 Tooth Front - 8mm Thread Size
|
|
|
|
|
|
|
|
Stock front sprocket (6 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: #25H
Teeth: 6 Tooth
8mm thread size.
|
Stock front sprocket (7 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 7 Tooth
10mm thread size.
|
Stock front sprocket (7 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 7 Tooth
8mm thread size.
|
|
|
|
Sprocket, Ver A - #25H Pinion, 8 Tooth Front - 10mm Thread Size
|
|
Sprocket, Ver A - #25H Pinion, 8 Tooth Front - 8mm Thread Size
|
|
Sprocket, Ver A - #25H Pinion, 9 Tooth Front - 10mm Thread Size
|
|
|
|
|
|
|
|
Stock front sprocket (8 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 8 Tooth
10mm thread size.
|
Stock front sprocket (8 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: #25H
Teeth: 8 Tooth
8mm thread size.
|
Stock front sprocket (9 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 9 Tooth
10mm thread size.
|
|
|
|
Sprocket, Ver A - #25H Pinion, 9 Tooth Front - 8mm Thread Size
|
|
Sprocket, Ver B - #25H Pinion, 7 Tooth Front - 8mm Thread Size (Version B)
|
|
Sprocket, Ver B - #25H Pinion, 6 Tooth Front - 10mm Thread Size (Version B)
|
|
|
|
|
|
|
|
Stock front sprocket (9 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: #25H
Teeth: 9 Tooth
8mm thread size.
|
Version B stock front sprocket (7 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 7 Tooth
8mm thread size.
|
Version B stock front sprocket (6 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Sprocket Size: #25H
Teeth: 6 Tooth
10mm thread size.
|
|
|
|
Sprocket, Ver B - #25H Pinion, 6 Tooth Front - 8mm Thread Size (Version B)
|
|
Sprocket, Ver B - #25H Pinion, 8 Tooth Front - 8mm Thread Size (Version B)
|
|
Starter Pawl Alloy
|
|
|
|
|
|
|
|
Version B stock front sprocket (6 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: #25H
Teeth: 6 Tooth
8mm thread size.
|
Version B stock front sprocket (8 Tooth) for mini pocket bikes, pocket quads and other same style engines.
Specifications:
Chain Size: #25H
Teeth: 8 Tooth
8mm thread size.
|
Aluminum starter claw for the 47-49cc mini pocket bikes pull starter.
Click on image for details.
|
|
|
|
Starter Pawl Stock
|
|
Throttle Cable - 32/28
|
|
Throttle Cable - Cag 28/23.5
|
|
|
|
|
|
|
|
Stock starter pawl for the MTA1, MTA2, MTA3, and many other 47-49cc models with the same pull starter.
Click on photo for more information.
|
Throttle cable for the Mini Pocket Bikes and other models with the same style cable.
Specifications:
Inner cable: 32 inches
Outer cable cover: 28 inches
|
Throttle Cable for the Mini Pocket Bikes and other models with the same style cable.
Specifications:
Inner cable: 28 inches
Outer cable cover: 23.5 inches
|
|
|
|
Throttle Cable - Colored 28.5/23.5 - Cag
|
|
Timing Advance Key/ Rocket Key - Cag 47cc - 49cc
|
|
Woodruff Key - 43cc- 49cc
|
|
|
|
|
|
|
|
NEW Colored Throttle Cable for the Mini Pocket Bikes (MTA1,MTA2,MX3, Cagllari, Daytona) and other models that use the same style cable.
Available Colors: Red, Blue, Green, Checkered and Braided Steel.
Specifications:
Inner cable: 28.5 inches
Outer cable cover: 23.5 inches
|
Advances ignition timing 10 degrees. Increases acceleration and gain up to 2mph on top speed
|
Stock Woodruff Key (Half-round key) for the Cag 47-49cc 2-stroke engines without an electric start. Fits on the flywheel and clutch key slots.
|
|
|
Become a Fan
Follow Us
Watch Our Channel