|
Air Filter - 41.5cc eton, cobra, rock
|
|
Axle - Rear Drive Assembly, Cobra
|
|
Belt - 575-5M-15
|
|
|
|
|
|
|
|
|
Stock air filter for 41.5cc 2-stroke E-ton, Cobra, and The Rock gas scooters.
|
Rear drive axle assembly for the Rock and Cobra gas scooters.
|
Short belt goes under belt cover (575mm) for the rock scooter.
Note: Please check your belt number. The belt comes in two sizes.
|
|
|
|
Belt - 575-5M-18
|
|
Belt - 600-5M-15
|
|
Belt - 670-5M-18
|
|
|
|
|
|
|
|
Short belt goes under belt cover (575mm) for the rock scooter.
Note: Please check your belt number. The belt comes in two sizes.
|
Belt for the Rock and other scooter models that use the same belt size.
Note: Please check your belt number. Belt is available in two sizes.
|
Belt for The Rock and Cobra as-well as other scooter models with the same belt number.
|
|
|
|
Belt Cover - Rock
|
|
Brake Cable - Front, The Rock & Cobra
|
|
Brake Cable - Rear, The Rock & Cobra
|
|
|
|
|
|
|
|
Chrome belt cover for Cobra, and The Rock gas scooters.
Specifications:
Width: 5 1/8 inches
Length: 10 7/8 inches
Thickness: 7/8 inch
|
Brake cable for the Cobra/Rock gas Scooters and other models with the same style brake cable.
Specifications:
Black Sleeve: 37.5 Inch
Inner Cable: 43.5 Inch
|
Brake Cable for the Cobra/Rock Gas Scooters and other models with the same style brake cable.
Specifications:
Black Sleeve: 57.5 Inch
Inner Cable: 64.5 Inch
|
|
|
|
Brake drum and band (Large 108mm or 4 1/4 inch)
|
|
Brake Lever - Left
|
|
Brake Lever - Right
|
|
|
|
|
|
|
|
Brake drum and band used on many models.
Click on photo for more info.
|
High quality Left Brake lever for the rock / cobra scooters and many other models with the same style lever.
Specifications:
Inner diameter: 22.5 mm
|
High quality Right Brake lever for the rock / cobra scooters and many other models with the same style lever.
Specifications:
Inner diameter: 22.5 mm
|
|
|
|
Carburetor - Stock, Rock
|
|
Carburetor Kit - Stock, Rock (replaces the original carburetor)
|
|
Chain - #35 - 37 inch
|
|
|
|
|
|
|
|
|
Stock carburetor for the 41.5cc 2-stroke E-ton, Cobra, and The Rock gas scooters.
|
This carburetor kit replaces the original stock carburetor on The Rock and Cobra scooters and the 41.5cc Eton 2 cycle engine. Shop tested and works just as good or better then the original.
|
Chain Compatible for the 41.5cc 2-stroke E-ton engines commonly used on the Cobra, the Rock and many other gas scooters
|
|
|
|
Chain Tensioner Pair - Cag
|
|
Clutch - Cobra, Rock (Eton 42cc)
|
|
Clutch Housing - Rock
|
|
|
|
|
|
|
|
Compatible with all mini pocket bikes and other models that use same style chain tensioner.
Click on photo for more info.
|
Stock clutch for the 41.5cc 2-stroke E-ton, Cobra, and The Rock gas scooters.
NOW BACK IN STOCK!
|
|
|
|
|
Crank Case - Cover, Rock
|
|
Crank Case - Right Side, Rock
|
|
Crankshaft (Version 1) - 22/26cc, 2-cycle
|
|
|
|
|
|
|
|
|
|
|
|
Version 1, male threads on both end. Stock crankshaft assembly for 22cc & 26cc 2-cycle engines.
|
|
|
|
Crankshaft (Version 2) - 22/26cc, 2-cycle
|
|
Drive shaft & Pulley Assembly
|
|
Engine Mounts, Rock
|
|
|
|
|
|
|
|
|
Version 2, male thread on one end and female thread on other end. Stock crankshaft assembly for 22cc & 26cc 2-cycle engines.
|
Upper drive shaft with pulley assembly.
Specifications:
Shaft
Length: 190mm
Pulley
Diameter: 31mm
Notes: We came across a few used drive shafts with pulleys assembly's. They are in used but working condition. Also the pulley gear as been spot welded to the shaft for extra strength. We only have 6 and they won't last long and once sold out we won't be able to restock anymore...
|
Engine mount kit for for the Cobra, and The Rock gas scooters.
BACK IN STOCK!!
|
|
|
|
Exhaust - Rock, Cobra
|
|
Flywheel Puller for small engines
|
|
Forks - Rock
|
|
|
|
|
|
|
|
Replacement exhaust pipe for the Cobra, and The Rock gas scooters.
BACK IN STOCK!!
|
Specifications:
Over Diameter: 105mm
Thickness: 11mm
Bolts (3): 50mm x 8mm
Center Bolt ((1): 72mm x 11mm
Can be adjusted from 35mm - 95mm
|
Stock front forks for the Cobra, and The Rock gas scooters.
BACK IN STOCK !!
|
|
|
|
Fuel Cut-Off Valve
|
|
Fuel Line Filter
|
|
Fuel Line with rubber grommet
|
|
|
|
|
|
|
|
|
Fits all bikes with a 3/16 to 1/4 fuel line hole.
|
Fuel line filter to provide cleaner fuel to the engine which prolongs engine and carburetor life.
|
Click on image for more details.
|
|
|
|
Fuel Line with Rubber Grommet
|
|
Gas Tank - Low Rider Rock
|
|
Loctite - High strength, Red (6ML Tube)
|
|
|
|
|
|
|
|
|
Rock & Cobra Scooters Fuel Line with Grommet.
|
Fits the Rock, Cobra, Razer and Grizzly gas scooters. As well as other models with the same style gas tank.
Specifications:
Width: 11.4 cm / 4.5 inches
Length: 34.2 cm / 13.5 inches
Thickness: 2 inches
|
Tread lock / Lock Tight (Med strength) 50g bottle.
Helps to prevent nuts and bolts from loosening due to vibration.
|
|
|
|
Loctite - Med strength, Blue (6ML Tube)
|
|
Mixing Bottle (40 oz)
|
|
Mixing Bottle (600ml)
|
|
|
|
|
|
|
|
Tread lock / Lock Tight (Med strength) 50g bottle.
Helps to prevent nuts and bolts from loosening due to vibration.
|
Mixing Bottle for the 2-stroke pocket bikes, scooters, atvs, R/C car engine and other applications.
Specifications:
Capacity: 40oz
Mixing Ratio Options: 25:1, 30:1 & 50:1
|
Mixing Bottle for the 2-stroke pocket bikes, scooters, atvs, and other applications.
|
|
|
|
Mud Flap - Rock
|
|
Neck, Folding Assy
|
|
Pull Start, Gen I & III - Rock (E-ton engine)
|
|
|
|
|
|
|
|
|
Rear mud flap for the Cobra, and The Rock gas scooters.
|
Lower goose neck assembly for The Rock and Cobra scooters.
Comes as shown in picture.
|
Pull starter for the 415cc Eton engine, Cobra, and The Rock gas scooters.
Note: Please check the inside of your pull start to confirm that you order the correct item.
Specifications:
Center portion of the part that silver: 45mm/ 1.77 inches
Bolt hole to bolt hole: 71mm/ 2.79 inches
Thickness: 1 5/8 inch
|
|
|
|
SC Tube - 2.50-4
|
|
SC Tube - 3.00-4
|
|
SC Tube - 3.50-4
|
|
|
|
|
|
|
|
Tube with bent valve stem.
Size: 2.50-4
|
Tube with bent valve stem.
Size: 3.00-4
|
Tube with bent valve stem.
Size: 3.50-4
|
|
|
|
Spark Plug - NGK BM6A (5921)
|
|
Tire - 9x3.50-4
|
|
|
|
|
|
|
|
This NGK spark plug is typically used on 33cc, 43cc, 47cc and 49cc 2-stroke engines found on pocket bikes and stand up style scooters.
Specifications:
NGK BM6A
Manufactures Part# 5921
|
|
|
|
Become a Fan
Follow Us
Watch Our Channel